Production process and process of melamine tableware (melamine tableware)

Melamine tableware, also known as melamine tableware, melamine dish, is made of melamine powder (melamine resin molding powder) as raw material, and is molded by high temperature and high pressure. The product has good chemical stability, is non-toxic and tasteless, and is safe to use. The following describes the entire production process of melamine tableware:

China Melamine Dinnerware Die

1. Weighing: We first choose the raw material box according to the weight of the product. Do not put too much raw material on it; the raw material is generally 2-4 grams more than the product, so that the raw edge will not be short of material.

China Melamine Tableware Die

2. Preheat material: Put the weighed ingredients into the high-profile wave, the high-profile wave should not be pressed too tightly, leaving a gap of 2-4 mm, which is conducive to the evaporation of gas and water; the raw material should not be too old, It is advisable to block the non-sticky box.

China Melamine Crockery Die

3. Plain surface: put the baked raw materials on the mold, start the plain button, and complete the leg mold after initial pressure, exhaust, secondary pressure and molding (specific data are debugged according to different products).

China Melamine Ware Die

4. Decal: Put the floral paper to be printed (the technical explanation of the flower paper) on the prime product, and start the decal button (the program is the same as the data).

5. Adding gold: It is the cover light that we usually talk about, sprinkle the cover powder evenly on the product, and start the gold button (the program is the same as the above data). Add gold to complete the removal of the product.

China Melamine Tableware Die

6. Send the product to the grinding workshop, first through the gauze bag and then through the impeller, and finally through the hemp wheel and the cloth wheel.

7. Inspection and packaging, finished products